Large Impeller Puller Heavy-Duty Marine Tool | ImpelPro®
Big impellers in tight spaces need a puller with enough reach to seat properly and enough grip to pull clean. The ImpelPro Large is a compact, bearing-driven impeller removal tool built for bigger flexible-vane impellers on inboard marine engines. Its bearing-controlled extraction and piercing teeth lock onto the impeller securely and wind it out in a controlled motion, protecting the pump housing and shaft. Sized for heavy-duty service, it fits impellers from 2-9/16" to 4-5/8", covering diesel inboards, twin engine setups, sportfishers, and workboats with limited access. Built from aluminum alloy and 316L stainless steel, light enough for confident one-handed use. For inboard engines only. Review the spec chart and measure your available space before ordering.
Quantity
Only 58 left in stock
ImpelPro Policies
More about ImpelPro Impeller Pullers
The ImpelPro Large was built for the jobs where reach and grip matter most. Bigger impellers, deeper pump housings, tight access. That's the work this tool was sized for.
If you run twin diesels, Cat C18s, or any high-output inboard engine or generator, impeller day doesn't have to mean calling a mechanic. Longer offset arms and larger rods give you the reach that bigger pumps require. Wind the threaded rod down against the shaft and the bearing takes over, smooth and controlled, without damaging what's around it. The piercing teeth lock in before you start and stay seated through the full extraction.
Sportfishing captains, twin engine boat owners, commercial operators, and marine mechanics running heavy iron all reach for the Large when the job calls for it. Before boating season hits and the calendar fills up, this is the tool that gets impeller day done on your schedule.
Built by a professional marine mechanic with 15 years working on tugboats and yachts.
Key Features
- Compact, one-hand design – ideal for tight inboard spaces
- Bearing-driven system – smooth, controlled extraction
- Piercing teeth – secure grip on flexible-vane impellers
- Marine-grade build – 316L stainless + aluminum alloy resists corrosion
DIY & professional use – saves time and reduces risk of damage
How ImpelPro Is Different
While ImpelPro may look similar at first glance, it works differently. ImpelPro's bearing-driven design winds the impeller out in a controlled motion, reducing effort and protecting surrounding components. Combined with piercing teeth that lock in securely, the more you wind down the threaded rod against the shaft, the bearing does the heavy lifting so you don't have to.
Specs & Compatibility
- Size range: Fits 2 9/16″ to 4 5/8″ impellers.
- Engine type: Inboard engines only (not for outboards)
- Applications: Larger boats, yachts, sportfishers, workboats, and compact engine compartments
- Materials: Aluminum alloy and 316L stainless steel for corrosion resistance and strength
- Review our full specs and measure your available space before ordering. View full specifications
- Protected by U.S. Patent No. 12,467,478
Included: Puller body, two rods, thumbscrew
⚠️ Before You Use Your ImpelPro To protect your tool and your warranty, do not use mechanical tools or pliers on the thumbscrew, strongback, or arms. The thumbscrew is designed for hand-tightening only. Using tools may cause damage — and will void your warranty.
Warning California Proposition 65 This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
About This Video
Watch how the ImpelPro Impeller Puller tackles multiple impeller removal scenarios — from tight generator boxes to standard marine water pumps and bench demos.
Transcript (Visual Description)
Upbeat music plays throughout. The ImpelPro Impeller Puller is shown gripping and removing impellers from several setups — a generator box, a standard marine water pump, and a bench demo pump. Close-up shots highlight the piercing teeth, smooth bearing system, and stainless-steel construction. Each scene shows quick, effortless impeller removal. The video ends with a clean pull and a final shot of the tool releasing the impeller.
About This Video
Watch how the ImpelPro Impeller Puller tackles multiple impeller removal scenarios — from tight generator boxes to standard marine water pumps and bench demos. Built from 316L stainless steel with a bearing system that does the heavy lifting, ImpelPro makes impeller removal fast, smooth, and frustration-free.
Transcript (Visual Description)
Upbeat music plays throughout. The ImpelPro Impeller Puller is shown gripping and removing impellers from several setups — a generator box, a standard marine water pump, and a bench demo pump. Close-up shots highlight the piercing teeth, smooth bearing system, and stainless-steel construction. Each scene shows quick, effortless impeller removal. The video ends with a clean pull and a final shot of the tool releasing the impeller.
For full details, see our Payment Policy.
For full policy, click here.
We ship all orders within 1 business day, with free economy shipping across the 48 contiguous U.S. states. Faster shipping options are available at checkout. View full Shipping Policy
We stand behind our tools with a 7-Year Limited Warranty. If your puller has a defect, we’ll make it right through repair, replacement, or refund. For full details, click here.