Impeller Puller Standard Compact For Tight Space | ImpelPro®
Whether your raw water pump is out in the open or buried in a corner, you need a puller that fits the space and does the job without prying, slipping, or damaging what's around it. The ImpelPro Standard is a compact, bearing-driven impeller removal tool built for inboard marine engines in tight spaces. Its bearing-controlled extraction system and piercing teeth grip flexible-vane impellers securely and pull them out in a controlled motion, protecting the pump housing and shaft in the process. Sized for the most common service jobs, it fits impellers from 1-9/16" to 2-9/16", covering sailboats, marine generators, and boats with cramped engine compartments. Built from aluminum alloy and 316L stainless steel, it's light, corrosion-resistant, and designed for confident one-handed use. For inboard engines only. Review the spec chart and measure your available space before ordering.
Quantity
Only 57 left in stock
ImpelPro Policies
More about ImpelPro Impeller Pullers
Compact doesn't mean compromise. The ImpelPro Standard was engineered to be the lowest-profile impeller removal tool you can rely on when space is tight and precision matters. Most engine rooms don't give you much room to work, and most impeller pullers weren't designed with that in mind. Tools that wobble, slip off under load, or need two hands to control — they weren't built by someone who actually works in engine rooms. The ImpelPro Standard was.
The bearing-driven design does most of the work. Wind the nut down against the shaft and the bearing takes over, smooth and controlled, without brute force. The piercing teeth lock onto the impeller before you start pulling, so the tool stays seated through the full extraction. One hand, tight space, stuck impeller.
Designed by a professional marine mechanic with 15 years working in real engine rooms on tugboats and yachts.
Key Features
- Compact, one-hand design – ideal for tight inboard spaces
- Bearing-driven system – smooth, controlled extraction
- Piercing teeth – secure grip on flexible-vane impellers
- Marine-grade build – 316L stainless + aluminum alloy resists corrosion
DIY & professional use – saves time and reduces risk of damage
How ImpelPro Is Different
While ImpelPro may look similar at first glance, it works differently. ImpelPro's bearing-driven design winds the impeller out in a controlled motion, reducing effort and protecting surrounding components. Combined with piercing teeth that lock in securely, the more you wind down the threaded rod against the shaft, the bearing does the heavy lifting so you don't have to.
Specs & Compatibility
- Size range: Fits 1 9/16″ to 2 9/16″ impellers.
- Engine type: Inboard engines only (not for outboards)
- Applications: Larger boats, yachts, sportfishers, workboats, and compact engine compartments
- Materials: Aluminum alloy and 316L stainless steel for corrosion resistance and strength
- Review our full specs and measure your available space before ordering. View full specifications
- Protected by U.S. Patent No. 12,467,478
Included: Puller body, two rods, thumbscrew
⚠️ Before You Use Your ImpelPro To protect your tool and your warranty, do not use mechanical tools or pliers on the thumbscrew, strongback, or arms. The thumbscrew is designed for hand-tightening only. Using tools may cause damage — and will void your warranty.
Warning California Proposition 65 This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
About This Video
Watch how the ImpelPro Impeller Puller tackles multiple impeller removal scenarios — from tight generator boxes to standard marine water pumps and bench demos.
Transcript (Visual Description)
Upbeat music plays throughout. The ImpelPro Impeller Puller is shown gripping and removing impellers from several setups — a generator box, a standard marine water pump, and a bench demo pump. Close-up shots highlight the piercing teeth, smooth bearing system, and stainless-steel construction. Each scene shows quick, effortless impeller removal. The video ends with a clean pull and a final shot of the tool releasing the impeller.
About This Video
Watch how the ImpelPro Impeller Puller tackles multiple impeller removal scenarios — from tight generator boxes to standard marine water pumps and bench demos. Built from 316L stainless steel with a bearing system that does the heavy lifting, ImpelPro makes impeller removal fast, smooth, and frustration-free.
Transcript (Visual Description)
Upbeat music plays throughout. The ImpelPro Impeller Puller is shown gripping and removing impellers from several setups — a generator box, a standard marine water pump, and a bench demo pump. Close-up shots highlight the piercing teeth, smooth bearing system, and stainless-steel construction. Each scene shows quick, effortless impeller removal. The video ends with a clean pull and a final shot of the tool releasing the impeller.
For full details, see our Payment Policy.
For full policy, click here.
We ship all orders within 1 business day, with free economy shipping across the 48 contiguous U.S. states. Faster shipping options are available at checkout. View full Shipping Policy
We stand behind our tools with a 7-Year Limited Warranty. If your puller has a defect, we’ll make it right through repair, replacement, or refund. For full details, click here.